360-740nm SCI and SCE Test Mode Color Testing Meter for Yarn,
Textile, Garment, Fabric
Color Testing Meter Introduction
Our device is widely used for color testing of painting,textile,
plastic, food, building material and other products’ color for
quality control.Our spectrophotometers adopt high technology from
overseas. It tests based on the condition of D/8 that is
internationally used. It could connect with color matching software
to get formular. Our CS-650 spectrophotometer is with UV light
source, so it is suitable for measurement the color of fluorescent
products.
Color Testing Meter Specifications
| Type | CS-650 |
| Illumination | d/8(Diffused lighting, 8 degrees observe angle),(conform to CIE
No.15,ISO 7724/1,ASTM E1164,DIN 5033 Teil7, JIS Z8722 Condition c
standards) |
| Size of integrating sphere | Φ40mm,Alvan diffused reflection surface coating |
| Illumination Light source | Xenon lamp |
| Sensor | dual light path sensor array |
| Wavelength range | 360-740nm |
| Wavelength interval | 10nm |
| Reflectivity range | 0-200% |
| Reflectivity resolution | 0.01% |
| Observation angle | 2°/10° |
| Measurement light source | A,C,D50,D55,D65,D75,F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,F11,F12,DLF,TL83, TL84,NBF,U30,CWF |
| Data being displayed | SPD distribution/data,sample's color values,color difference
values/graph,pass/fail results,color error tendency,color
simulation,display measurement area,history data color
simulation,manual input standard sample,generate measurement report |
| Measurement time interval | 1 seconds |
| Measurement time | 1 second |
| Color space | CIE-L*a*b, L*C*h, L*u*v, XYZ, Yxy, Reflectance Hunterlab,Munsell MI,CMYK,RGB,HSB |
| Color difference formulas | ΔE*ab, ΔE*CH, ΔE*uv, ΔE*cmc(2:1), ΔE*cmc(1:1),ΔE*94,ΔE*00 ΔEab(Hunter),555,color classification |
| Other colorimetric indices | WI(ASTM E313-10,ASTM E313-73,CIE/ISO, AATCC, Hunter, Taube Berger, Ganz, Stensby); YI(ASTM D1925,ASTM E313-00,ASTM
E313-73);Tint(ASTM E313,CIE,Ganz) Metamerism index Milm, Stick color fastness, Color fastness ISO luminance, 8 gloss, A density, T density, M density, E density |
| Repeatability | light splitting reflectivity:standard deviation within 0.08% |
color values:ΔE*ab<=0.02, Maximum:0.04 |
| Battery capacity | rechargeable, 10000 continuous tests, 7.4V/6000mAh |
| Interface | USB |
| Data storage | 20000 test results |
| Light source longevity | 5 years, 1.5 million tests |
| Inter-instrument agreement | ΔE*ab within 0.2(BCRA color charts II, average of the 12 charts) |
| Work temperature | 0~45℃, relative humidity 80% or below( at 35°C ),no condensation |
Color Testing Meter Applications
It can be applied to laboratories, factories and others field that
need color testing;
Allows medium and small companies to obtain high performance color
management system;
The following are some of the application of our Spectrophotometers
Color Testing Meter Competitive Advantage
1). Obtained Metrology Accreditation Certificate in China
2). Large data storage space
3). Large TFT display screen
4). Modern and fashionable design based on human engineering
5). Easy to operate and compact operation interface
6). Pre-locating panel design for easy instrument calibration
7). Uses LED light source; high capacity rechargeable lithium-ion
battery
8). Can measure both SCI(specular included)and SCE(specular
excluded) at the same time
9). Includes PC software to manage data
10) .Can connect to micro-printers for printing
11). Professional horizontal design and it does not have any moving
parts, which avoids the shaking of the instrument during
measurement process. This makes the measurement more accurate
12). PC software for easy measurement data management
13). Large data storage space: can store up to 100 sets of standard
samples, with up to 200 measurement records for each standard
sample
